Search Results

Standard

JAUS Messaging over the OMG Data Distribution Service (DDS)

2024-03-18

CURRENT

ARP6227

This document defines a standard representation of JAUS AS5684A message data in DDS IDL defined by the Object Management Group (OMG) CORBA 3.2 specification. This document does NOT address how JAUS transport considerations or JAUS service protocols are implemented on OMG DDS platforms.

Standard

Engine and Transmission Identification Numbers

2024-03-18

CURRENT

J129_202403

This SAE Recommended Practice has been established to provide direction for the design and installation of an identification number (IN) as assigned to vehicle engines, transmissions, and transaxles. The IN is used for tracking or traceability of these components. In adhering to these recommended practices, facility of application in factory production and appearance quality are matters for manufacturer control. Reference SAE J853.

Standard

BEARING, ROLLER, NEEDLE, SINGLE ROW, HEAVY DUTY, TYPE I, ANTIFRICTION, INCH

2024-03-18

CURRENT

AS24461E

Standard

Aluminum Alloy, Die and Hand Forgings, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7175-T74), Solution and Precipitation Heat Treated

2024-03-18

WIP

AMS4149G

This specification covers an aluminum alloy in the form of die and hand forgings 6.000 inches (152.00 mm) and under in nominal thickness at time of heat treatment (see 8.6).

Standard

Steel, Corrosion-Resistant, Bars, Wire, Forgings, Extrusions, Mechanical Tubing, Rings, and Stock for Forgings, Extrusions, and Rings, Wear and Galling Resistant, 8.0Mn - 4.0Si - 17Cr - 8.5Ni - 0.13N Solution Heat Treated

2024-03-18

CURRENT

AMS5848F

This specification covers a corrosion-resistant steel in the form of bars, wire, forgings, extrusions, mechanical tubing, flash-welded rings, and stock for forging, extruding, or flash-welded rings.

Standard

Aluminum Alloy, Alclad Sheet 3.8Cu - 1.0Mg - 0.30Mn - 0.60Zn (Alclad 2056-T3) Solution Heat Treated and Cold Worked

2024-03-12

CURRENT

AMS4298B

This specification covers an aluminum alloy in the form of sheet 0.063 to 0.236 inch (1.60 to 6.00 mm), incl, in thickness, clad on both sides (see 8.4).

Standard

Aluminum Sheet, Laminated, Surface Bonded

2024-03-11

WIP

AMS4013J

This specification covers aluminum and aluminum alloy foil in the form of laminated sheet.

Standard

Aluminum Alloy, Die and Hand Forgings, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T74), Solution Heat Treated and Aged

2024-03-11

WIP

AMS4131F

This specification covers an aluminum alloy in the form of die forgings and hand forgings up to 6.000 inches (152.40 mm) in nominal thickness at the time of heat treatment (see 8.4).

Standard

Aluminum Alloy, Hand Forgings and Rolled Rings, 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T852/T851), Solution Heat Treated, Mechanically Stress Relieved, and Precipitation Heat Treated

2024-03-11

WIP

AMS4144H

This specification covers an aluminum alloy in the form of hand forgings 17 inches (432 mm) and under in nominal thickness, and rolled rings up to 6 inches, incl (152 mm, incl) in nominal thickness at the time of heat treatment (see 8.5).

Standard

Aluminum Alloy, Hand Forgings 8.0Zn - 1.0Cu - 1.6Mg - 0.12Zr (7037-T7452) Solution Heat Treated, Compression Stress Relieved, and Overaged (Composition similar to UNS A97037)

2024-03-11

WIP

AMS4456B

This specification covers an aluminum alloy in the form of hand forgings 11.000 inches (280 mm) and under in nominal thickness and of forging stock of any size (see 8.6).

Standard

Aluminum Alloy, Extrusions, 4.4Cu - 1.5Mg - 0.60Mn (2024-T3510), Solution Heat Treated, Cold Worked, Stress-Relieved by Stretching, Unstraightened

2024-03-08

WIP

AMS4164K

This specification covers an aluminum alloy in the form of extruded bars, rods, wire, profiles, and tubing produced with cross sectional area of 32 in2 (206 cm2) maximum.

Standard

Aluminum Alloy, Plate, 6.2Zn - 1.8Cu - 2.4Mg - 0.13Zr (7010-T7651), Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated

2024-03-08

WIP

AMS4204E

This specification covers an aluminum alloy in the form of plate 0.250 to 5.500 inch (6.35 to 139.70 mm), inclusive in nominal thickness (see 8.5).

Standard

Aluminum Alloy Bars, Rods, and Wire, Rolled or Cold Finished, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-F), As Fabricated, or When Specified, Annealed (7075-O)

2024-03-08

WIP

AMS4186F

This specification covers an aluminum alloy in the form of bars, rods, and wire, in the sizes shown in 3.3.3, in the “as fabricated (F) temper” (see 8.5). When specified, product shall be supplied in the annealed (O) condition.

Standard

Aluminum Alloy, Die and Hand Forgings and Rolled Rings, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6), Solution and Precipitation Heat Treated

2024-03-08

WIP

AMS4126E

This specification covers an aluminum alloy in the form of die forgings 4 inches (102 mm) and under in nominal thickness at time of heat treatment, hand forgings up to 6 inches (152 mm) incl, in as forged thickness, rolled rings with wall thickness up to 3.5 inches (89 mm) incl, and stock of any size for forging or rolled rings (see 8.6).

Standard

Aluminum Alloy Forgings and Rolled or Forged Rings, 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T6), Solution and Precipitation Heat Treated

2024-03-08

WIP

AMS4143G

This specification covers an aluminum alloy in the form of die and hand forgings 4 inches (102 mm) and under in thickness, rolled or forged rings 2.50 inches (63.5 mm) and under in radial thickness, and stock of any size for forging or rings (see 8.5).

Standard

Castings, Aluminum Alloy Sand, 5.0Si - 1.2Cu - 0.50Mg (355.0-T71), Solution Heat Treated and Overaged

2024-03-08

WIP

AMS4214L

This specification covers an aluminum alloy in the form of sand castings.

Standard

Aluminum Alloy, Extruded Bar, Rod, and Shapes, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr, 7075-T76(51X) Solution Heat Treated and Overaged

2024-03-08

WIP

AMS4317C

This specification covers an aluminum alloy in the form of extruded bars, rods, and shapes up to 4.000 inches, incl (101.60 mm, incl) in nominal diameter or least thickness, and having a nominal cross-sectional area up to 20 in2 (129 cm2) (see 8.5).

Standard

Aluminum Alloy, Plate (2397-T87), 2.8Cu - 1.4Li - 0.30Mn - 0.12Zr - 0.10Zn, Solution Heat Treated, Cold Worked, and Artificially Aged

2024-03-08

WIP

AMS4328C

This specification covers an aluminum alloy in the form of plate 3.000 to 6.000 inch (76.20 to 152.40 mm), inclusive, in nominal thickness (see 8.5).

Standard

Aluminum Alloy, Hand Forgings, 7.5Zn - 1.6Cu - 1.5Mg - 0.12Zr (7085-T7452), Solution Heat Treated, Compression Stress-Relieved, and Overaged

2024-03-08

WIP

AMS4414A

This specification covers an aluminum alloy in the form of hand forgings 12 inches (305 mm) and under in nominal thickness and of forging stock.

Standard

Aluminum Alloy, Plate (7065-T7451), 7.7Zn - 2.1Cu - 1.65Mg - 0.10Zr, Solution Heat Treated, Stress-Relieved, and Overaged

2024-03-08

WIP

AMS4361B

This specification covers an aluminum alloy in the form of plate.